![\"\"](\"http:\/\/43.135.177.8\/wp-content\/uploads\/2021\/06\/111.png\")
Silicon Mold<\/p>\n[vc_row rt_row_background_width=”default” rt_row_style=”default-style” rt_row_borders=”” rt_row_paddings=”true” rt_bg_effect=”classic” rt_bg_image_repeat=”repeat” rt_bg_size=”cover” rt_bg_position=”right top” rt_bg_attachment=”scroll” rt_bg_video_format=”self-hosted”][vc_column width=”4\/5″ rt_wrp_col_paddings=”false” rt_border_top=”” rt_border_bottom=”” rt_border_left=”” rt_border_right=”” rt_border_top_mobile=”” rt_border_bottom_mobile=”” rt_border_left_mobile=”” rt_border_right_mobile=”” rt_bg_image_repeat=”repeat” rt_bg_size=”auto auto” rt_bg_position=”right top” rt_bg_attachment=”scroll”][vc_column_text]Silicon Mold<\/p>\n
Mould diagram of silicon wafer<\/p>\n
Note for use of silicon wafer mould of wen hao is as follows:<\/p>\n
1. The silicon wafer mould has been volatilized before leaving the factory.<\/p>\n
2. The use of silicon wafer molds shall be carried out in a clean environment.<\/p>\n
3. It is better to use the shovel tweezers to pick up, to avoid the dirt on the edge of the mold and affect the appearance.<\/p>\n
4. Pay attention to any operation of the silicon chip should be handled gently to prevent accidental fragmentation.<\/p>\n
5. Confirm whether the mold surface is clean and the chip structure is intact before casting PDMS.<\/p>\n
6. The molds shall not be cleaned with organic solvent.<\/p>\n
7. If the surface of silicon wafer is dirty, it will affect casting; Use dust-free cloth to dip in acetone or ethanol to wipe carefully to prevent damage; Be careful not to touch the photoresist graphics.<\/p>\n
8. When mixing PDMS, mix evenly and degassing before casting.<\/p>\n
Ix. When pouring PDMS, try to make the bottom surface of the silicon wafer mould and the casting plate stick well, and the horizontal is the best.<\/p>\n
10. After pouring PDMS, set it still, and put it into the oven after the bubbles disappear in PDMS to ensure the level; If there are still air bubbles after static setting, use a needle carefully to remove them to avoid scratching the passage.<\/p>\n
11. After the PDMS is fully formed, take it out, and then conduct pdms-mould separation after cooling. Pay attention to the strength control, be careful to peel it off.<\/p>\n
12. After using the mold, put the silicon wafer mold into the silicon wafer temporary storage box; Keep clean and dust free.[\/vc_column_text][\/vc_column][vc_column width=”1\/5″ rt_wrp_col_paddings=”false” rt_border_top=”” rt_border_bottom=”” rt_border_left=”” rt_border_right=”” rt_border_top_mobile=”” rt_border_bottom_mobile=”” rt_border_left_mobile=”” rt_border_right_mobile=”” rt_bg_image_repeat=”repeat” rt_bg_size=”auto auto” rt_bg_position=”right top” rt_bg_attachment=”scroll”][vc_widget_sidebar sidebar_id=”sidebar-for-blog”][\/vc_column][\/vc_row]<\/p>\n","protected":false},"excerpt":{"rendered":"
[vc_row rt_row_background_width=”default” rt_row_style=”default-style” rt_row_borders=”” rt_row_paddings=”true” rt_bg_effect=”classic” rt_bg_image_repeat=”repeat” rt_bg_size=”cover” rt_bg_position=”right top” rt_bg_attachment=”scroll” rt_bg_video_format=”self-hosted”][vc_column width=”4\/5″ rt_wrp_col_paddings=”false” rt_border_top=”” rt_border_bottom=”” rt_border_left=”” rt_border_right=”” rt_border_top_mobile=”” rt_border_bottom_mobile=”” rt_border_left_mobile=”” rt_border_right_mobile=”” rt_bg_image_repeat=”repeat” rt_bg_size=”auto auto” rt_bg_position=”right top” rt_bg_attachment=”scroll”][vc_column_text]Silicon Mold Mould diagram of silicon wafer Note for use of silicon wafer mould of wen hao is as follows: 1. The silicon wafer mould has been volatilized […]<\/p>\n","protected":false},"author":1,"featured_media":3369,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[73,20],"tags":[],"yoast_head":"\n